
Add to Cart
Water slide decal paper for glass 500*700mm 75 sheets each pack
Sumarry
Printing your own designs onto glass surfaces using inkjet and laser waterslide decal paper and dry rub off decal sheets.
Transporting your ideas and designs onto glass can be both rewarding and inspiring. There are no limits as to what can be achieved with a little imagination.Our range of either waterslide paper or dry rub off paper will help you to quickly transfer your own prints onto glass.
Application
Place glass decals in a shallow pan (such as a developing tray) of warm water and soak for about 30-60 seconds, or until the color layer can be released from the backing paper. The ceramic decal / glass decal can now be applied to the ware in various ways. The two most popular methods are described below.
For Very Large Decals: Apply glass decal over the object face-up, and slip out the backing paper from underneath. Adjust the position of the ceramic decal / glass decal on the ware and remove water using a rubber squeegee or damp sponge. This is accomplished by patting down from the center toward the outer edges until all excess water has been removed and wrinkles and air bubbles have been smoothed out.
What Is "Contouring" Decal Paper?
Most all decal papers will bend to a degree on flat surfaces. For instance ... applying the decal to a round object with a flat surface like a mug, jar, bucket, etc. The object is round but the sides are flat.
Decal papers that are considered contouring have the ability to bend around more complex curves with minimal folding and creases.
Q2: Can I re-position window decals?
A: Yes, you can. Just peel your decal off and follow the application instructions above to reapply.
Package
we will use the stander export carton to make sure the goods is not damaged.we put 75 sheets for one pack.
Delivery time
We will arrange the shipment by air or sea immediately if we have store,but it need a week if we do not have store for you orders.