Fashionable Water Transfer Ceramic Decal Paper Gold Luster For Dish / Cup

Water slide decal paper for ceramic dish

Sumarry

Gold luster water decals paper are currently available in four designs -- leaves, flowers, insects, and butterflies -- with each sheet measuring 5.25" x 4.25". Each sheet features several small icons that can be cut up and placed on pieces individually, or grouped together for maximum golden impact.

Application

it can use for ceramic proucat ,such as the dish,cup,bowl and so on ,you can transfer the fruit,flowers,and so on at ceramic things ,it can let you have a delicious meal or have sweet coffe.

Storage

For the longest shelf life, ceramic decals decals should be stored at a constant room temperature of approximately 68-74ºF and humidity of about 60-65%.

Storing the ceramic decals / glass decals will not degrade their quality, providing that the above temperature and humidity conditions are maintained. For long-term storage, ceramic decals decals should remain in their original cartons, with the cartons in a vertical position. Only those cartons intended for immediate use should be left lying flat.

Instruction

1. Clean the surface of your piece (where the decal will go) with alcohol and a clean cloth.
2. Cut out your image as close to the edges as possible. Try to make curved rather than angled comers and edges. Sharp edges can cause the decal to lift up.
3. Fill a shallow bottomed pan or tray with warm water. Soak the decal for 30-60 seconds, or until the cover coat and image begin to separate from the paper. (Sometimes the paper will curl and flatten out again)
4. Moisten the ceramic surface where the decal will go with a wet sponge. This helps you position your decal without wrinkling or tearing it.
5. GENTLY slide the decal into position on your piece, carefully smoothing it from the center outward, with a small sponge,soft rubber rib, or rubber brayer. This forces all the water and air bubbles out from beneath the decal. Check to make sure there are no air bubbles or edges that won't stick. If the decal is not in complete contact with the surface, it will disappear in the firing. If you need to reposition the decal, flood it with a little water first.
6. Let the decal dry overnight.

FAQ

Q1.Can you sent some free sample for test?

Yes, we can sent some free sample to you ,but the freight is collect.

Q2. Do you use the INCOTERMS?

We can use every INCOTERMS beside the DDP.

Package and delivery

we will use the stander export carton to make sure the goods is not damaged, we can provide goods within a week if we have enough raw materials at store.