25 Sheets Water Slide Ceramic Decal Paper 500 * 700mm For Ceramic Surface

500*700mm Water slide decal paper for ceramic 25 sheets each pack

Sumarry

Decals are a great way to spice up your surface decorations. Used for centuries, decals provide a simple way add complex decorative images, patterns and text repeatedly to a ceramic surface.

Instruction

1. Clean the surface of your piece with alcohol and a clean cloth.
2. Cut out your image as close to the edges as possible. Try to make curved rather than angled comers and edges. Sharp edges can cause the decal to lift up.
3. Fill a shallow bottomed pan or tray with warm water. Soak the decal for 5-10 seconds, or until the cover coat and image begin to separate from the paper.
4. Moisten the ceramic surface where the decal will go with a wet sponge. This helps you position your decal without wrinkling or tearing it.
5. GENTLY slide the decal into position on your piece, carefully smoothing it from the center outward, with a small sponge,soft rubber rib, or rubber brayer. This forces all the water and air bubbles out from beneath the decal. Check to make sure there are no air bubbles or edges that won't stick. If the decal is not in complete contact with the surface, it will disappear in the firing. If you need to reposition the decal, flood it with a little water first.
6. Let the decal dry overnight.

WHY ARE THE DECALS TINTED YELLOW/ORANGE/GREEN?

Decal printers often use a yellow tint in the covercoat or flux to help ensure proper coverage of the decals. Don’t fret! The tint is in the finish coating and will NOT be visible after the decal has fired.

Package

Normally we will use the stander export carton to make sure the goods is not damaged, we put 25 sheets for one pack.

Delivery

We can arrange shipment within 7-10 work day for the normal specifications.