Good Slip Water Slide Printable Decal Paper 500 * 700mm For Screen Printing

Water slide decal printable paper 400*600mm

Sumarry

Create your image using a computer graphics program. You can choose from clip art, one of your own photos, or create a drawing to scan into your program.

Use your graphics program to resize and crop your design. Make sure the design will fit comfortably on your chosen item without folding or wrinkling.

Set your image print standard to the highest resolution and glossy paper setting, and print your design using water-slide decal transfer paper. Be sure to follow any instructions provided. If you have included white in your decal design, you will have to use transfer paper specially designed for this purpose, because standard transfer paper makes white areas transparent, and your printer cannot print the color white.

Spray your decal with a clear acrylic coating to protect and preserve the design. Once the coating has dried, cut around the design, being careful not to cut into the image. If you are using white transfer paper, you will have a small white border around your image.

Submerge the decal in water for approximately one minute, or according to the manufacture's instructions. Slide the decal from its backing onto the surface of your chosen item and allow to dry. You now have a one-of-a-kind item to enjoy or share.

Advantage

1. No poisonous, no pollution
2. Steady quality
3. Easy to operate
4. No deformation no curling
5. Use for screen printing.
6. Soaking time: Decals can be slippery after soaking for 5 ± 1s
7. Good drainage
8. Good slip

Instruction

1. Cut out the graphic you want
2. Immerse the paper in water in about 5 sec,the fixing paper will absorb enough water and can be seperated from the water transfer paper.
3. Hold the paper(two layer together) and transfer it to the surface of your substrate.shift the paper a little bit. use your figer to hold the water transfer paper in position.pull and shift the fixing paper away slowly.shift and fix the water transfer paper onto the position you want.
4. Use the paper towel or a piece of the cloth to squessze the water.avoid excessive pressure that may shift or damage the water transfer paper.
5. When applying to large area,you may use a plastic squeegee to squeeze the air bubble and water away.
6. After approx for about 10mins, the printed graphic will transfer onto the surface of the substrate.use a forceps to peer off the transparen covering paper.
7. When dried,place the subject in the oven and baked.the baking temperatuer and curling time various with different materials.please refer to the following chart for details.
8. Finished.

Package

Normally we use the stander export carton to make sure the goods is not damaged, but we can pack it as your reqirement.

Delivery time

We can provide goods within a week if we have enough raw materials at store.