Durable Hydrographics Water Transfer Printing Paper For Bicycle 500 * 700

Water transfer screen printing paper for bicycle white 500*700

Summary

Water transfer paper is a new kind of transfer method that easy to transfer the picture on the object. Printing the picture on the paper by screen printing machine with decal process printing ink. Coating a layer of fine coating or clear coating by screen printing with high quantity. Transfer the picture onto the object you want . Each set must dry completely. Easy to do and cheap, but with good quality.

Description

1. Color: white
2. Size: 500*700mm
3. Flatness: Flat, no curl
4. Printing adaptability: no deformation at room temperature 25 ℃ ± 5 ℃
5. Paper material: Pure wood pulp base paper
6. Printing environment requirements: Temperature 20-25 ℃, relative humidity 40-60
7. Paper thickness: 175g: 220u ± 10u
8. Product environmental testing: This product meets and fully complies with the ROHS

Advantage

1. Smooth surface, no concavities, uniform layer
2. No leakage of gelatin
3. Strong adaptation to environment
4. Soaking time: Decals can be slippery after soaking for 5 ± 1s
5. Post adaptability: Good drainage, good slip, moisture and bubbles easy to exclude
6. Water-solubility of the resin: Uniform coating, smooth and delicate, no white dot, no leakage of plastic
7. Curled to stretch time: 5 ± 1s
8. Separation time after soaking: 5 ± 1s
9. Paper stability: Without resin left on the decal, not fade when soaked in water, not pollute decals
10. efficient to remove: no residues after removing, no print of the paper and no stain after decoration firing.

Application

it can use for the sport tools,such as the bicycle,it can print the parttern that you like,the parttern such as the letters,flowers,idos and so on,it can make your bicycle very beautiful and unique.

Process

1. Choose one picture that you download from the Internet.
2. Print it by screen printing,laser printing,inkjet printing.
3. Use a hair drier to dry it or natural air dry(5 minutes)
4. Using the transparent gloss paint to spray evenly in the pattern surface.(you can get transparent gloss paint in the paint shop.)
5. Dry it and cut it.
6. Put it into the water. After 5-10s, remove the transfer membrame 0.5cm first from the base paper.
7. Put the 0.5cm picture first onto the surface then pull the base paper away slowly.
8. Clean the bubble under the transfer membrame with a brush. use soft cloth or absorbent paper to scrape the surface.
9. If time is limited you can use a oven to dry it 10-15 minutes with 100°C. If the material is plastic, 50-70°C is all right. If time is enough, hair drier also can be OK.
10. Finish,you will transfer the parttern to your bicycle.

Package and delivery

Normally we use the stander export carton to make sure the goods is not damaged, and we also can pack it as your requirement ,

We can provide goods within a week if we have enough raw materials at store.